Ingredients: in addition to polymers, various plastic additives (such as stabilizers, plasticizers, colorants, lubricants, reinforcers, fillers, etc.) are generally added to the raw materials used in plastic processing to improve the molding process and the use performance of products or reduce the cost of products.
0010010 nbsp;
Molding: the key link of plastic processing. Various forms of plastic (powder, granule, solution or dispersion) are made into products or billets of the required shape. There are more than 30 forming methods. Its choice mainly depends on the type of plastic (thermoplastic or thermosetting), the initial shape and the shape and size of the product. The common processing methods of thermoplastic include extrusion, injection molding, calendering, blow molding and thermoforming. Generally, the processing methods of thermosetting plastics are molding, transfer molding and injection molding.
0010010 nbsp;
Mechanical processing: using the processing methods of metal and wood to manufacture plastic products with very accurate size or small quantity, it can also be used as the auxiliary process of molding, such as sawing of extruded profiles. Because the properties of plastic are different from that of metal and wood, the thermal conductivity of plastic is poor, the coefficient of thermal expansion and the modulus of elasticity are low. When the pressure of clamp or cutting tool is too large, it is easy to cause deformation, melt when cutting, and adhere to the cutting tool. Therefore, when plastic is machined, the cutting tools and the corresponding cutting speed must adapt to the characteristics of plastic. The commonly used machining methods include sawing, shearing, punching, turning, planing, drilling, grinding, polishing, thread processing, etc.
0010010 nbsp;
Jointing: the methods of jointing plastic parts are welding and bonding. The welding method is hot air welding with electrode, hot melt welding with hot electrode, high frequency welding, friction welding, induction welding, ultrasonic welding, etc. Adhesive method can be divided into flux, resin solution and hot-melt adhesive according to the adhesive used.
0010010 nbsp;
Surface decoration: the purpose is to beautify the surface of plastic products, usually including: mechanical decoration, that is, using filing, grinding, polishing and other processes to remove burrs and burrs on the workpiece, as well as to correct the size, etc.; coating, including coating the workpiece surface with paint, brightening the surface with solvent, covering the product surface with patterned film, etc.; color application, including color painting, printing and hot stamping; metal plating, including Vacuum coating, electroplating and chemical silver plating. Among them, hot stamping is to transfer the color aluminum foil layer (or other pattern film layer) on the hot stamping film to the workpiece under heating and pressure. Many household appliances, building products, daily necessities, etc. use this method to obtain patterns such as metallic luster or wood grain.
0010010 nbsp;
Assembly: the operation of assembling the plastic parts into complete products by means of bonding, welding and mechanical connection. For example, plastic profiles are sawed, welded, drilled and assembled into plastic window frames and doors.
